Thống Kê Truy Cập

Số người khách online: 22

Số người truy cập: 113380

OPTI UPS - Bộ lưu điện Opti Online 6KVA-10KVA Rackmount

Giá: Đang Cập Nhật

An Online UPS is not a further improvement of the standby technology, but a completely different approach to providing the highest level of power supply. A double-conversion refers to converting the incoming

• Online double conversion design

• Pure sine wave output with less than 3% THD

• Fully digitized microprocessor control

• Power factor correction

• Selectable UPS output voltage

• High efficiency mode

• Cold start function (DC power on)

• Emergency power off function (EPO)

• Short circuit and overload protection

• Fax / Modem / LAN data line surge protection

• Advanced battery management (ABM)

• Automatic battery charging in UPS OFF mode

• Automatic diagnostics and battery check-up

• Extended battery pack available

• Multilanguage LCD display

• Perfect Autonomy
This UPS offers power protection to your equipment with or without the use of the bundled software

• RS232 and USB Communication ports, UPS monitoring software

• Supports OPTI-SAFE Sentinel Microsoft Windows 98, Windows 7, Windows 8, Windows 2000, Windows XP, Windows Vista, Windows Server 2003 and Windows Server 2008

Model Name DS6KB-RMP DS10KB-RMP
Topology True On-Line, Double Conversion, High Frequency
On-battery Output Waveform Pure Sine Wave
Maximum Capacity 6000VA / 4200W 10000VA / 7000W
Cabinet Type 3U Machine + 3U Battery Pack
INPUT
Nominal Input Voltage 220 / 230 / 240Vac
Input Voltage Regulation 176-276Vac
Nominal Input Frequency 50Hz / 60Hz Auto Sensing
Parallel function (Total Parallel Number) Parallel up to 3 units (Total 4 units including mainframe)
OUTPUT
Nominal Output Voltage 220 / 230 / 240Vac
Output Voltage Regulation Rated Voltage ±2% (on battery)
Transfer Time 0 ms
Start on Battery Yes
Auto Restart Yes
PROTECTION
Data Line Surge Protection NA
Overload Protection UPS shuts down at 130% load after 10 secs or 150% load after 2 secs
Over Current Protection Circuit Breaker
Discharge Protection Keylock
BATTERY
Backup Time (Full / Half load) 7 / 14 min 4 / 12 min
Recharge Time to 90% (Typical) < 4 Hours
Extended Battery Pack* BP6000-RM BP10000-RM
240V 240V
(12V / 7.2AH×20) (12V / 9AH×20)
ADVANCED WARNINGS / DIAGNOSTICS
Front Panel On / On Line / On Battery / Bypass / Fault and 15-UPS status
Audible Alarms Battery Mode / Battery Test / Replace Battery / Low Battery / UPS fault / Overload
COMMUNICATION INTERFACE
Communication Port RS232 & USB#
SNMP Manageable Yes
ENVIRONMENTAL
Operation Temperature 0°~40°C / 32°~104°F
Storage Temperature -15°~50°C / 5°~122°F
Relative Humidity 0~95% Non condensing
Audible Noise < 55 dBA
PHYSICAL / DS-B-RM
Dimensions
Physical / Packing (L×W×H)
in 26.4×16.9×5.1 / 32.7×22×11.0
mm 672×428×130 / 819×566×280
Weight
Net / Gross
lbs 50.7 / 59.5
kg 23 / 27
PHYSICAL / DS-BP-RM
Dimensions
Physical / Packing (L×W×H)
in 23.5×16.9×5.1 / 28.7×21.5×14.5
mm 597×428×130 / 740×560×370
Weight
Net / Gross
lbs 145.5 / 166.5
kg 66 / 75.5
CONFORMANCE
Approvals CE

Specifications are subject to change without notice.
* One external battery pack is included with above models. Battery pack needs to be connected to UPS before connecting any load and turning on the UPS. The additional battery packs and charge box are optional for long backup demands.
# The model with optional USB port provides both RS232 and USB connectivity, but only one connectivity can be used at a time.

►CATALOGUE SẢN PHẨM

►HƯỚNG DẪN SỬ DỤNG